Check Stock

get a quote

Contact Us

Partcode

Quantity

Location

Requirements

Email




JD370AR (Refurbished JD370A Stock)

Refurbished JD370A / JD370AR
GTIN: 8856311869612 | Quantity: 1 JD370AR Stock

Refurbished JD370A / JD370AR  in Stock image

Hewlett Packard Enterprise ProCurve 5500-48G SI

Hewlett Packard Enterprise 5500-48G SI, ProCurve. Switch type: Managed, Switch layer: L3. Console port: RJ-45, Copper ethernet cabling technology: 1000BASE-T, 100BASE-TX, 10BASE-T. Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u. Supported data transfer rates: 10/100/1000 Mbps, Maximum data transfer rate: 1 Gbit/s. Management protocols: SNMP v1, 2c, 3, Telnet, RMON 1, 2, 3, 9

These Gigabit Ethernet switches deliver quad-speed performance, 10/100/1000 and 10 Gigabit Ethernet, as well as advanced voice-enhanced features such as Power over Ethernet (PoE), auto-voice VLAN, and Quality of Service (QoS). As a result, they are ideal for enterprise organizations seeking to build a secure, convergence-enhanced campus network. Robust IPv6 support and 10 Gigabit Ethernet uplinks future-proof an enterprise network against obsolescence. Resilient Ring Protection Protocol (RRPP), Smart Link, and Intelligent Resilient Framework (IRF) deliver 50 ms switchover and carrier-class reliability.

- Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic. Advanced classifier-based QoS: classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch. Powerful QoS feature: supports the following congestion actions: strict priority queuing (SP), weighted round robin (WRR) queuing, and SP+WRR. Traffic policing: supports Committed Access Rate (CAR) and line rate.
- Friendly port names: allow assignment of descriptive names to ports. Remote configuration and management: is available through a secure Web browser or a command-line interface (CLI). Manager and operator privilege levels: enable read-only (operator) and read/write (manager) access on CLI and Web browser management interfaces. Command authorization: leverages HWTACACS to link a custom list of CLI commands to an individual network administrator's login; also provides an audit trail. Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS.
- Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports. Flow control: using standard IEEE 802.3x, it provides back pressure to reduce congestion in heavy traffic situations. Ethernet OAM: provides a Layer 2 link performance and fault detection monitoring tool, which reduces failover and network convergence times. Jumbo packet support: supports up to 9216-byte frame size to improve the performance of large data transfers. Optional 10 GbE ports: through the use of optional modules, additional 10 GbE connections are available for uplinks or high-bandwidth server connections; flexibly supports XFP, SFP+, or CX4 local connections.
- Nonblocking architecture: up to 192 Gbps nonblocking switching fabric provides wire-speed switching with up to 143 million pps throughput. Hardware-based wire-speed access control lists (ACLs): feature-rich ACL implementation (TCAM-based) helps ensure high levels of security and ease of administration without impacting network performance.
- Separate data and control paths: keeps control separated from services and keeps service processing isolated; increases security and performance. External redundant power supply: provides high reliability. Smart link: allows 50 ms failover between links. Spanning Tree/MSTP and RSTP: provide redundant links while preventing network loops. Rapid Ring Protection Protocol (RRPP): connects multiple switches in a high-performance ring using standard Ethernet technology; traffic can be rerouted around the ring in less than 50 ms, reducing the impact on traffic and applications.
- 16K MAC address table: provides access to many Layer 2 devices. VLAN support and tagging: support IEEE 802.1Q with 4,094 simultaneous VLAN IDs. GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs. IEEE 802.1ad QinQ and Selective QinQ: increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed campus or metro network. 10 GbE port aggregation: allows grouping of ports to increase overall data throughput to a remote device.


HPE Renew Remanufacturing Checklist HPE Renew Certificate of Quality



How it works!

With limited availability, 80% of stock is less than 12 months old and all items come with a full manufacturer warranty!

How it works

Reseller Discounts Ask a Question Check Stock Fast Delivery

Why choose HPE Renew Stock


The HPE Renew Program offers fully remanufactured HPE stock at great discounts. HP warranty is assured as all products are subjected to the same stringent testing as for new stock.



*Please note that HP Renew orders are subject to availability and a minimum order value of £500*



Contact us for a Quote!: JD370A used stock - Contact Us!


If you looking for a HPE Renew part not currently on our offers list please get in touch for a custom quote. : info@hperenewoffers.com